This blog post will be about the Friday The 13th: A New Begining impostor hood. It's not meant to be anything special.
This happens to be the hood in a behind the scenes, being used for Roy's death scene. The colors seem to indicate that they were the same colors used on Jason's hood in the previous 3 films. Which only changed colors due to the white and bluish lighting.
In this image, we can see the Adams apple of the hood.
The hood also seems to have, the very same deformities as part 4 Jason. Who we know for sure Roy Burns imitated as he had a picture of that same Jason in his wallet after his death scene.
In this next scene, we can clearly see that there was an ax wound present on the hood.
Here we can see what the right ear seems to look like.
Here another picture not only showing that the right ear, but more surfaces of the neck in which the next references will show how the neck area seems to look.
here is the left side view of the neck.
here is a back view of both the head and neck areas.
If you guys have anything else to add to this, please don't be afraid to comment and provide screenshots and such in case I missed anything. You can also post questions if you guys have any.
The part 5 hockey masks one of the most unknown masks out there in the Friday The 13th community. Very little is known about the mask even when discussed in forums. Today we will be discussing the mask and a few misconceptions.
Misconceptions:
The Mask is white with grey weathering. (Wrong, it looks white because of the white and bluish lighting in the film. The mask is definitely Ivory with a raw sienna wash.)
The Mask is yellow with a greenish color. (Wrong again, look at number one.)
The Ghost Chevron is a Part 6 Chevron. (Wrong, it's actually a part 3/4 ghost chevron which is why it's a sharp pointy looking rather than a straight one like the part 6.)
The Mask has sanded damages all over. (Wrong, that is just something some artist do for some reason, look at the blog for actual sanding points.)
About The Mask
So far from what we know according to the artist David B Miller who worked on the film. The mask was a recast of the part 4 hero mask (aka the part 3 stunt mask). Miller made mention that he made two molds of the mask, a copy of part 4 and another with the ax wound filled in becoming the part 5 mask.
Currently being sold by David Miller Creations aka Elmoscave on eBay. The DMC mask seems to be a production mold mask that was either damaged or was purposely made to have some issues in order to warrant off recasters and the such.
DMC Mask Issues
The jawline of the mask is bent in more than in the movie, where it's sticking out a little more.
The bottom left chin hole, is facing to the left instead of closer to the right by the right hole.
The top strap hole was moved down more for some odd reason.
The chin seems to need a bit of a trim as it's longer and wider than the movie.
The nose hole seems to be facing the wrong way as well.
The straps used by DMC are not movie accurate.
The right Chevron is actually a little smaller, sharper and not close to the eyes as it should be.
The colors of the mask are simple, the mask blank used in the movie seems to be clear with the inside painted a satin blue color, which explains the inside color of the paint chips. The second coat on the inside is a flat black color. This was done according to David Miller so that lights wouldn't shine inside the mask blinding the actors. Now for the front of the mask, Ivory was used as the base color of the mask then a mixture of Burnt Umber and Burnt Sienna for the grime also known as dirt. Then a very thin wash of Raw Sienna for the yellowish tone.
The yellow (Raw Sienna) color has nothing to do with lighting but is the actual colors that are being used and presented here in the images.
The mask should become a white, yellowish cream color if done correctly under the correct white and bluish lighting.
In the movie, there seem to be about 3 straps that seem to change according to the scenes.
Door Breaker Scene
In this scene, the straps are made up of 2, 3/4 elastic spool bands. The first connects to the sides of the mask while the second one connects into a loose loop over the sides by a small rivet up to the top of the mask.
First, we will talk about the side straps, they seem to be folded almost exactly like the straps on the part 3/4 mask.
All while the top strap seems to be folded a little longer while the river seems to set a little above the center of the strap.
You can clearly see with these pictures presented above that, there are no signs of any side strap adjuster. Which makes me believe it's a one-piece.
VS Tractor Scene
After getting up from being knocked down by Regie and the tractor, Roy's straps change; But we will come back to that after this.
As the straps changed, the back either broke and they tied it up, or they had different styled adjusters. This was just something worth noting.
Barn Scene
During the time Roy gets up from the tractor you can see that the straps change. The changes aren't noticeable at first, but the straps are switched from a 3/4 to 1-inch straps. The top still being elastic, while the sides are actually a material known as nylon with stripes two stripes following to each end.
The side stripes are actually no longer one piece, but two with a strap adjuster on the left side.
The rivets colors aren't specified but from what DMC uses and you can see on screen they do seem to be a golden color, they just seem to be weathered. The size of the rivets is 10mm Head, 8mm Post
The Chevrons are Satin Blue in color, and first, appear to be undamaged at first. The left one is farther from the left eye, while the right one is closer to the eye.
Vs Tractor - Barn Scene
This the scene were the chevron actually becomes and looks damaged. They remain placed in the same spots and area as seen in the picture.
Mask Weathering
I will explain in detail the damages and weathering of the mask. I will start by making the point that there seems to be a nose scuff on the mask even in the "Door Breaker Scene." which seems to go along into the whole film even towards the end.
Door Breaker - Barn Scene Grime/Dirt References
These few images are examples of where the grime has been located for the most part.
Notes:
The ghost chevron on the mask is actually a part 3/4 and not a part 6 chevron as many people tend to place on it.
The images under this minor header have been modified to show you where the grime seems to be placed.
Ambulance Scene
From the looks of it, the ambulance scene seems to have been shot right after the final hospital scene as you can clearly see the many similarities shown in the picture. You can clearly see the top chip damage by the top strap, the sanded damage on the eyes, the scuff on the nose and the chin damage. If you keep looking you will also notice that the grime is different, almost like the one in the hospital end scene.
Vs Tractor Scene
Here you can clearly see that from the scene a couple things change. The first seems to be the right chevron suddenly being damaged, and the second being nose scuff can be clearly seen. There also seems to be a new grime/dirt on the top left side of the temple vent holes that wasn't there before. A final look would also show that there is no chin damage on the mask in this very scene.
Barn scene
In the barn scene, we can see that the nose damage is more pronounced than in any other scene. If you look closer you can see a bit of that sanded damage on the left eye and some paint chipping on the top of the mask by the top strap. There also seems to be no sign of chin damage till later on in the barn-scene.
Hospital Scene
In the final hospital scene where Tommy puts on the mask to kill pam, you notice a couple of things. You can clearly see that the eyes themselves have sanded scuffing, allowing you to see some of that Ivory base coat on the mask. The other thing is that the chin damage seems to be there as well and seems totally different than the chin damage on the ambulance scene. This leaves me to believe that multiple masks were used instead of one like some seem to believe. The nose scuff seems to have worsened to the point where you can start to see a lot of blue, which tells us the blank used for the mask was clear.
Then the final thing you will notice is that the weathering seems to have also changed making the mask look even dirtier than it was.
If you guys have anything else to add to this, please don't be afraid to comment and provide screenshots and such in case I missed anything. You can also post questions if you guys have any.
It seems it has been a battle of the fans when it comes to the colors of Roy Burns's coveralls. One part yelling blue, and the other yelling green. Well, I will give you guys some evidence on the actual colors of the coveralls.
This image is a picture of a mannequin created for Roy's death scene. Right away you can tell that the colors for the suit are in fact green, spruce green to be precise. But this is not the only example I have; while researching the coveralls, I've found a video showing Dick Wieand Who played both Roy Burns outside of costume and Unmasked in the death/reveal scene.
In this video, you will see that Dick Wieand refers to them as green coveralls.
Here are other examples of the coveralls being green for those who even with evidence doesn't believe it.
Even in this image, we can see the color picker from photoshop shows a spruce green color.
The Brand
The brand is unknown but a lot of speculation could be put into what could have been used in the films. From the Information, I've gathered they tend to buy most of their wardrobe from sears.. so these could be Sears specific spruce green coveralls that have the same chest pockets as the Red Kaps. Speaking of which the ones most Roy cosplayers go for are the Red Kaps Spruce Green coveralls from amazon.
as seen worn by Tom Morga in this picture that I found on google search.
In the movie you can clearly see the suit change, for example, the suit is dirty and weathered with parts of the suit fabric being worn and scuffed. I will show you specific scenes and explain what can be seen.
Door Breaker Scene
As I call it the "Door Breaker Scene" you can see that the suit has blood on the forearm areas, and possibly on the chest which seems more like the rain has blended some of the blood into the costume.
Vs Tractor Scene
In this scene, we see that Reggie is driving a tractor-like vehicle in which he rams against Roy's abdomen area. After getting up you can see that Roy's suit has holes and blood in the abdomen areas that the "spikes" went into.
Barn Scene
In the barn scene, not much can be said but that the suit is dirtier and a shoulder wound seems to have appeared on shoulder's left shoulder after getting attacked my pam with a chain saw.
Death Scene
In the final Reveal Scene when it's revealed to be Roy, the suit seems to have been pierced by farming spikes. I will let the picture speak for itself here.
If you guys have anything else to add to this, please don't be afraid to comment and provide screenshots and such in case I missed anything. You can also post questions if you guys have any.
